Pressure sensors are familiar to everyone, but atmospheric pressure sensors are rarely known. The atmospheric pressure sensor is packaged with imported chips and has high precision and high sensitivity through precise temperature compensation. Has good moisture resistance and excellent media compatibility and has good polarity, anti-interference function of reverse phase protection box. This article mainly explains the working principle, main technical parameters and applicable scope of atmospheric pressure sensors.
The sensor diffuses a Wheatstone bridge on the monocrystalline silicon wafer. The voltage resistance effect is a change in the bridge wall resistance value, which produces a differential voltage signal. This signal is converted into a standard 4-20mA/1~5VDC by a dedicated amplifier and then subjected to voltage and current conversion. The transmitter is developed using advanced circuit module technology for measuring environmental pressure and outputting standard voltage signals for convenient use.
Measured medium: gas, liquid and vapor
Pressure type: gauge pressure
Range: -100KPa to -5KPa to 0 to 5KPa to 10KPa to 100KPa
Output: General: 4 to 20 mA (two-wire system), 0 to 5 VDC, 0 to 10 VDC, 0.5 to 4.5 VDC (three-wire system)
Special: 0~20mA, 1~5VDC, 0~2VDC, voltage proportional output, RS485 digital signal
Comprehensive accuracy: ±0.25% FS, ±0.5% FS
Power supply: 24VDC (12 ~ 36VDC)
Insulation resistance: ≥1000MΩ/100VDC
Load resistance: current output type: maximum 800Ω; voltage output type: greater than 50KΩ
Medium temperature: -20 ~ 85 ° C, -20 ~ 150 ° C, -20 ~ 200 ° C, -20 ~ 300 ° C (optional)
Ambient temperature: -20 ~ 85 ° C
Relative humidity: 0 to 95% RH
Sealing level: IP65/IP68
Overload capability: 150% FS
Response time: ≤3mS
Vibration effect: ≤±0.15%FS/year (mechanical vibration frequency 20Hz～1000Hz)
Electrical connection: stainless steel waterproof sealed terminal, four-core aviation connector, Hessman connector, etc.
Pressure connection: M20×1.5, other threads can be designed according to customer requirements
1. Pneumatic control system;
2. Petrochemical, environmental protection, air compression;
3. Industrial process detection and control; laboratory pressure verification
4. Building automation and building consumption systems;
5. Furnace pressure control and ventilation system pressure control;
6. Power station operation inspection and locomotive brake system;
Atmospheric pressure sensor is a kind of advanced circuit module technology to develop the transmitter, which is used to measure the ambient pressure and output the standard voltage signal for convenient use. Can be widely used in environmental measurement of the environment, greenhouses, aquaculture, etc.