The Differential Pressure Transmitter For Level Control is a silt detection device that can be used to measure the liquid level and has a long-distance signal function.
After the water level changes, the differential pressure measured by the differential pressure level transmitter will also change, and there is a linear relationship between them.
The Differential Pressure Transmitter For Level Control is a silt detection device that can be used to measure the liquid level and has a long-distance signal function. After the water level changes, the differential pressure measured by the differential pressure level transmitter will also change, and there is a linear relationship between them. The electric differential pressure level transmitter and the flange type liquid level transmitter are easy to install and easy to realize remote transmission and automatic adjustment. Level measurement in industrial production steam boilers is suitable for installation of differential pressure level transmitters.
Know more about pressure transducer 4-20ma
Specification:
Measurement range | 1~200mH2O | ||
Overload pressure | 150%FS | ||
Failure pressure | 300%FS | ||
Accuracy | ±0.1%F.S, ±0.25%F.S, ±0.5%F.S | ||
Stability | ≤0.3%FS/year | ||
Operation temperature | -40°C~85°C | ||
compensated temperature range | -10°C~70°C | ||
storage temperature range | -40~+85 °C | ||
material of pressure membrane | 316LSS | ||
Electrics feature | Two-wire type | Three-wire type | |
Signal output | 4~20mA | 0/1~5V | 0~10V |
Power supply | 10~30Vdc | 6~24Vdc | 12~30Vdc/ac |
Load resistance | R≤(U-10)/0.02 (for 4/20mA) | R>100kΩ(for votage output) | |
Insulate | ≥100MΩ@100Vdc | ||
electrical interface | waterproof outlet | ||
display | 3-1/2 LCD | ||
response time(10%~90%) | ≤10ms | ||
shock/impact | 10gRMS,(20~2000)Hz / 100g,11ms | ||
protection | IP68 | ||
Electromagnetic compatibility | Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2; | ||
Features:
1. The Differential Pressure Transmitter For Level Control has a wide range of applications. It can be applied in high temperature, high pressure, high viscosity and strong corrosion.
2. Its measurement range is large, and there is no blind zone in the full range. However, the customer needs to select the transmitter of the corresponding model according to different ranges.
3. It has high reliability and high stability, long service life and low maintenance cost.
4. This device has high measurement accuracy with an accuracy of ±0.25% F.S, ±0.1% F.S, and ±0.5% F.S.
5. The transmitter has intelligent self-diagnosis and remote tuning.
6. Its signal output is diversified, and it can output standard 4mA~20mA current signal, pulse signal and multi-protocol fieldbus communication signals.
