Fully welded pressure transmitter with flush membrane Flush membrane Fully welded version Robust stainless steel housing External programming of zero point and span with FlexProgrammer 9701 High overpressure resistance Available with option al ATEX approval (4 ... 20 mA output signal)
Flush membrane
Fully welded version
Robust stainless steel housing
External programming of zero points and span with FlexProgrammer 9701
High overpressure resistance
Available with optional ATEX approval (4 ... 20 mA output signal)
Measuring range
-1 … 400 bar
Min. measuring span
0.1 bar
Max. measuring span
400 bar
Pressure type
Absolute
Relative (gauged)
Standard error of measurement (BFSL)
± 0.04 % FSR
± 0.1 % FSR
± 0.2 % FSR
Including non-linearity, hysteresis and non-repeatability according BFSL
For turndown, multiply this value by the applied turndown ratio
Max. measuring error
± 0.1 % FSR
± 0.25 % FSR
± 0.5 % FSR
Including zero-point and span error, nonlinearity (by terminal base line), hysteresis and non-repeatability (EN 61298-2)
For turndown, multiply this value by the applied turndown ratio
Temperature coefficient
≤ 0.03 % FSR/10 K , measuring span
≤ 0.03 % FSR/10 K , zero point
Compensated temperature range
-40 … 85 °C
Long term stability
≤ 0.1 % FSR/a , measuring range > 1 bar
≤ 1 mbar , measuring range ≤ 1 bar
Max. turndown ratio
5 : 1
Rise time (10 ... 90 %)
≤ 5 ms
Explosion protection
ATEX II 1/2G Ex ia IIC T4/T6 Ga/Gb
ATEX II 1/2G Ex ia IIC T3/T4/T6 Ga/Gb
ATEX II 1D Ex ia IIIC T107 °C IP6X Da
ATEX II 1G Ex ia IIC T4/T6 Ga
ATEX II 1G Ex ia IIC T3/T4/T6 Ga