Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. Product Parameters Pressure Ranges: 1000 mbar (15psi) up to 700 bar (10,000psi) gauge or...
Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations.
Pressure Ranges: 1000 mbar (15psi) up to 700 bar (10,000psi) gauge or absolute plus suction and compound ranges
Accuracy: 0.25% or 0.1% FS BSL
Output Signals: 4-20mA, 0/1-5Vdc, 0/1-10Vdc, 0/1-6Vdc, 0.5-4.5Vdc, 2mV/V or 10mV/V (amplified ratiometric) sensitivity
Electrical Connections: IP66 Integral cable gland, DIN plug, Military Amphenol, Binder and M12 connectors
Pressure Connections: 1/8, 1/4, 1/2 BSP, 1/8, 1/4, 1/2 NPT, 7/16, 9/16 UNF and M20 threads male and female
Special Options: 150 DegC cooling element, 0.1% FS accuracy
Media Compatibility: 303 stainless steel, Ceramic Al2O3 diaphragm and Viton/NBR/EPDM seal gasket
Dimensions: 27mm diameter
Weight: 100g
The IMP pressure sensor has a 303 stainless steel body housing and pressure connector as standard. For more corrosive applications it is possible to supply with a 316 or a Duplex stainless steel pressure connector. For large quantity OEM applications a plastic construction is also an option for non-metal compatible media.
A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinery monitoring applications.
Any factory set pressure scaling between -1 and 700 bar is possible with the IMP digital signal conditioning electronics, just specify what you require in the comments below before submitting the form. Depending on the quantity required, it is also possible to consider custom electrical and process connectors to suit your application.
Sensing the load on a hydraulic reel in marine applications.
SKU ID: s1-imp-0014
Part No: IMP-GP1K5-6A4-BAV-00-000
Pressure Range: 0-1500
Units: psi
Range Type: Positive Gauge (atm to +P)
Output Signal: 0 – 5V, 3-wire (6)
Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
Thermal Zero Shift: 0.04% FS per °C (standard) (4)
Electrical Connection: Large DIN plug (standard) (B)
Process Connection: G1/4 male DIN 3852 (A)
Media Exposed Seals: Viton (standard)(V)
Special Requirements: Standard (000)
Monitor the pressure of Oxygen gas in pressurised tank using the Oxygen clean version of the IMP pressure sensor.
SKU ID: s1-imp-0013
Part No: IMP-G2003-9A4-BAV-00-006
Pressure Range: 0 to 200
Units: bar
Range Type: Positive Gauge (atm to +P)
Output Signal: 0.5 – 4.5V, 3-wire ratiometric (9)
Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
Thermal Zero Shift: 0.04% FS per °C (standard) (4)
Electrical Connection: Large DIN plug (standard) (B)
Process Connection: G1/4 male DIN 3852 (A)
Media Exposed Seals: Viton (V)
Special Requirements: Oxygen cleaned (006)
Measuring incoming Nitrogen line on a high pressure furnace.
SKU ID: s1-imp-0003
Pressure Range: 0 to 25
Units: bar
Range Type: Positive Gauge (atm to +P)
Output Signal: 4 – 20mA, 2-wire (5)
Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
Thermal Zero Shift: 0.04% FS per °C (standard) (4)
Electrical Connection: Large DIN plug (standard) (B)
Process Connection: G1/2 male DIN 3852 (F)
Media Exposed Seals: Viton (standard)(V)
Special Requirements: Standard (000)
Air inlet sensor for air screw compressor.
SKU ID: s1-imp-0010
Part No: IMP-A1100-6A4-BRV-00-000
Pressure Range: 0 to 1100
Units: mbar
Range Type: Absolute (0 to +P)
Output Signal: 0 – 5V, 3-wire (6)
Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
Thermal Zero Shift: 0.04% FS per °C (standard) (4)
Electrical Connection: Large DIN plug (standard) (B)
Process Connection: 1/4 NPT male, 150°C Integrated cooler (R)
Media Exposed Seals: Viton (standard)(V)
Special Requirements: Standard (000)
Vacuum transducer for measuring engine vacuum.
SKU ID: s1-imp-0017
Datum: Gauge (G)
Pressure Range: 0 to -15 psi
Output: 1 – 5V, 3-wire (8)
Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
Thermal Zero Shift: 0.04% FS per °C (standard) (4)
Electrical Connection: Large DIN plug (B)
Process Connection: G1/4 male, 150°C Integrated cooler (P)
Internal Seal Material: Viton (standard)(V)
Cable Length if required (metres):
Special Requirements: Standard (000)